| |
Need help? To contact us, read our FAQ's, to use our troubleshooting guide, and more! Click Here |
|
 | | | 200GB 7200RPM 8MB CACHE DESKTOP HARD DRIVE |
|
 |
|
 |
|
| |
This drive is compatible with a wide variety of Desktop computers currently on the market that utilize the IDE interface. It is also a direct replacement for hard drive models listed below. |
|
|
|
| Technical Features: |
Compatible With The Following Drives: |
 |
200GB Capacity,
7,200 RPM |
Seagate Model # ST3200822A |
|
8.5ms Average Seek Time |
Hitachi Model#
HDS722525VLAT80 |
|
3.5" Form Factor |
Western Digital Model# WD2000JB |
|
Ultra ATA-100 IDE Interface |
Maxtor Model# 6Y200P0 |
|
8MB Buffer |
|
|
Fluid Dynamic Bearing motor |
|
|
3 Year Warranty |
|
| |
|
|
|
|
The new series of desktop drives incorporates both new and proven technologies to boost the performance, capacity, and reliability to handle a wide range of advanced storage requirements. Advantages of this drive are fast transfer rates, low power utilization and quiet acoustics.
|
|
|
|
Specifications: |
|
| Interface |
ATA Ultra-100 |
| Capacity (GB) |
200 |
| Data heads (physical) |
6 |
| Data disks |
3 |
| Data buffer |
8 MB |
| Rotational speed (rpm) |
7,200 |
| Latency average (ms) |
4.17 |
| Interface transfer rate (max. MB/sec) |
100 |
| Seek time (read, typical) |
| Average (ms) |
8.5/8.8 |
| Track to track (ms) |
1.1 |
| Full track (ms) |
15.1 |
| Requirement |
+5 VDC (+/- 5%), +12 VDC (+10%/-8%) |
| Height (mm) |
25.4 |
| Width (mm) |
101.6 |
| Depth (mm) |
146 |
| Weight (max. g) |
640 |
| Ambient temperature |
5° to 55° C |
| Relative humidity (non-condensing) |
8% to 90% |
| Max. wet bulb (non-condensing) |
29.4° C |
| Shock (half sine wave, 2ms) |
55G |
| Vibration (random (RMS) |
0.67G for horizontal, 0.56G for vertical |
| Ambient temperature |
-40° to 65° C |
| Relative humidity (non-condensing) |
5% to 95% |
| Max. wet bulb (non-condensing) |
35° C |
| Shock (half sine wave, 2ms) |
350G (2/1 disks) |
| Vibration (random (RMS) |
1.04G rms (XYZ) |
|
|
| |
|
